Porta Contours Timber Lining Boards are available in a range of textured designs to create calming atmospheres or vibrant patterns.
Easy to install
Set lengths (to reduce waste)
Staining and coating available
Supported by a wide range of trims and mouldings
Mix and match designs
Lining Board Range
SPECIES Tasmanian Oak or Clear Pine | SIZE 91x21mm | COVER 78mm | LENGTH 1.2, 1.8 & 2.7m
Profiles pictured in Tasmanian Oak. *Sizing excluding Plateau-39
Corner Bead Range
Lining boards are suitable for curves down to a 1000mm radius. For tighter curves down to a 500mm radius Porta can supply matching corner beads. For more information download the Curved Wall Installation Information under the Resources section below.
SPECIES Tasmanian Oak | SIZE 39x16mm | LENGTH 1.2, 1.8 & 2.7m
Profiles pictured in Tasmanian Oak.
Click to view project details.
Porta Contours architectural timber linings allow you to create either calming atmospheres or vibrant textured designs.
Porta Contours is available in a range of architectural designs.
How to specify
Product + Profile + Length + Species + Code + Certification. For full specification details see Specifying section of the Install Guide.
Read our advice on how to protect your timber specification for internal applications here.
Suitable for internal vertical applications. The tongue and groove connection allows for secret direct fixing.
Lining boards are suitable for curves down to a 1000mm radius. For tighter curves down to a 500mm radius Porta can supply matching corner beads (available for Riverine, Strata & Cirque).
Porta Contours is available factory pre-finished for a ready to install solution. The standard offer is a clear satin (30% gloss) coating.
Pre-finished Coating Information
Porta if certified under recognised schemes; PEFC™ and FSC® to supply responsibly sourced timber.